FISHING FOR JUNK
Overview
Any undesirable object that is stuck or accidentally dropped in a well is
referred to as “junk.” Junk may include bit cones, tong dies, broken slips,
reamer parts or debris created by a fishing or milling operation, or any other
small debris that could impede normal drilling operations. Because of the
wide variety of junk that can be in the hole and the likelihood that the
customer may not know what the junk is, you will have to be fairly creative
in planning a junk fishing operation. However, because of the time and
money spent on fishing operations, you will need to devise a method for
fishing the junk that involves the fewest trips and equipment as possible.
referred to as “junk.” Junk may include bit cones, tong dies, broken slips,
reamer parts or debris created by a fishing or milling operation, or any other
small debris that could impede normal drilling operations. Because of the
wide variety of junk that can be in the hole and the likelihood that the
customer may not know what the junk is, you will have to be fairly creative
in planning a junk fishing operation. However, because of the time and
money spent on fishing operations, you will need to devise a method for
fishing the junk that involves the fewest trips and equipment as possible.
Deciding How to Fish Junk
Evaluating the junk
Any debris or junk in the borehole must be thoroughly evaluated before any
successful fishing attempt can be made. Depending on the properties of the
junk, it can either be milled up, recovered, or pushed back (walled-off) into
the formation.
Consider the following questions before proceeding with a fishing job:
successful fishing attempt can be made. Depending on the properties of the
junk, it can either be milled up, recovered, or pushed back (walled-off) into
the formation.
Consider the following questions before proceeding with a fishing job:
- What is the size, weight, and condition of the junk?
- Is the junk magnetic?
- Can the junk be picked up?
- What are the dimensions of the bit cone or cones?
The company man would ideally know exactly what the junk in the hole
consists of. When the nature of the junk is unknown, you must be creative
in your approach to fishing the junk.
consists of. When the nature of the junk is unknown, you must be creative
in your approach to fishing the junk.
Impact of the junk size, weight, and condition
Try to determine the size, weight, and condition of the junk. This
information will help you determine the best method for fishing the junk.
For example, if you have junk that is:
information will help you determine the best method for fishing the junk.
For example, if you have junk that is:
- large and/or irregularly shaped, you might try a poor boy basket
- smaller, you might try a magnet, core type, or reverse circulating basket.
For very large pieces of junk, you may need to use a junk shot to break it
into smaller pieces before attempting to fish.
into smaller pieces before attempting to fish.
Determining if the junk is magnetic
Try to find out what the junk is made of. If it has a high ferrous content, it
is probably magnetic. The easiest method for fishing magnetic junk is using
a magnet.
is probably magnetic. The easiest method for fishing magnetic junk is using
a magnet.
Determining is the junk can be picked up
If the OD of the junk is significantly smaller than the ID of the hole, than
there is a good chance that it can be picked up. However, if the OD of the
junk is fairly large, it will be harder to get a fishing tool over it. In this case,
you will probably have to mill the junk to break it up and collect the pieces
in a boot basket.
there is a good chance that it can be picked up. However, if the OD of the
junk is fairly large, it will be harder to get a fishing tool over it. In this case,
you will probably have to mill the junk to break it up and collect the pieces
in a boot basket.
Determining cone dimensions
If you know the junk is a bit cone, the dimensions of the cone must be
known before deciding which tool to run. Find out the size of the bit from
which the cone was lost, and verify the maximum OD of the cone. Select a
tool that has an ID at least 1/8" larger than the OD of the cone.
For example, a 7 7/8" bit cone is 5 15/64" OD. A 7 1/8" OD Bowen Itco
Type Junk Basket has an ID size of 5 28/64". This tool will get over the bit
cone.
Standard rock bit cone dimensions are shown in Table 2-1. Note: This
information can also be found in the Bowen user manuals.
known before deciding which tool to run. Find out the size of the bit from
which the cone was lost, and verify the maximum OD of the cone. Select a
tool that has an ID at least 1/8" larger than the OD of the cone.
For example, a 7 7/8" bit cone is 5 15/64" OD. A 7 1/8" OD Bowen Itco
Type Junk Basket has an ID size of 5 28/64". This tool will get over the bit
cone.
Standard rock bit cone dimensions are shown in Table 2-1. Note: This
information can also be found in the Bowen user manuals.
