PROPERTIES OF NATURAL GAS

Treated natural gas consists mainly of methane; the properties of both
gases (natural gas and methane) are nearly similar. However, natural gas
is not pure methane, and its properties are modified by the presence of
impurities, such as N2 and CO2 and small amounts of unrecovered heavier
hydrocarbons.
An important property of natural gas is its heating value. Relatively
high amounts of nitrogen and/or carbon dioxide reduce the heating value
of the gas. Pure methane has a heating value of 1,009 Btu/ft3. This value
is reduced to approximately 900 Btu/ft3 if the gas contains about 10% N2
and CO2. (The heating value of either nitrogen or carbon dioxide is zero.)
On the other hand, the heating value of natural gas could exceed
methane’s due to the presence of higher-molecular weight hydrocarbons,
which have higher heating values. For example, ethane’s heating value is
1,800 Btu/ft3, compared to 1,009 Btu/ft3 for methane. Heating values of
hydrocarbons normally present in natural gas are shown in Table 1-4.
Natural gas is usually sold according to its heating values. The heating
value of a product gas is a function of the constituents present in the mixture.
In the natural gas trade, a heating value of one million Btu is
approximately equivalent to 1,000 ft3 of natural gas.